Products

CONMIX WLL

USES Prevention is better than cure. It is chloride free, two-in-one integral water proofing compound for concrete and mortar. It increases work ability, reduces permeability throughout the depth of concrete, greater protection to re-bars, maintaining strength of concrete, increases durability, improves elasticity, cohesion, easier placing, better compaction and finishing. Dr Leakage CONMIX -WLL fills all micro-porositythroughout the depth of concrete and ensures perfect water tightness. Conforms to: IS 2645. Dosage: 150ml per 50kg cement, Dr Leakage CONMIX-WLL is recommended for usage in all water retaining structures like basement, sunken slabs, balcony, terrace slabs and water tanks etc.

MIXING 200ml to 250ml per 50kg cement. However optimum dosage to bedetermined.

ALL BOND SBR

USES Dr. Leakage ALL BOND SBR is a multi-purpose additive and can be used with concrete and mortar for several benefits like excellent bonding, waterproofing characteristics, flexibility, workability, cohesiveness, early and ultimate strength gaining and for increasing durability and for water proofing applications.

COVERAGE Dr. Leakage ALL BOND SBR to be used along with water for easy and uniform distribution of chemical effect through-out the depth of concrete. Add Dr. Leakage ALL BOND SBR into the water and mix thoroughly. Dr. Leakage ALL BOND SBR mixed water to be added to the concrete / mortar to achieve required results. For concrete repairs 200ml to 500ml per one bag of cement, is recommended. For bonding purposes (old concrete to new concrete), Dr. Leakage ALL BOND SBR to be brush applied. Surface should be saturated with water before applying this product.

FOUNDA CARE

Single Component and Ready to use
Water Thinnable & Non-Toxic
Polymer Based
Excellent Bonding
Abrasion Resistant
Waterproofing & Termite Free
Easy to Apply & Long Life
No Smell – Black in Colour
Customer Friendly
Standard Conforms to R406.2

PRI MIS

USES all structures that are required to be waterproofed & protected against the ingress of moisture, like basement, water tank, swimming pools, sunken slabs, retaining walls, terrace slabs, lift pits etc.,

MIXING 1:1:3 (Primis:water:cement) to form a paint consistency.

APPLICATION Remove all loose particles from the surface, clean the area & keep the surface slightly wet. The prepared primis to be applied by brush & provide sufficient hiding properties to form a uniform water proof layer, water curing 2 to 3 times after 8 hours of application, is an added advantage.

OPTIMA MD

USES Dr. Leakage Optima MD is a medium density single component which comes as semi liquid in nature, white colour coating for exposed walls & roof tops. It fills micro porosity, hairline cracks & provides a flexible and strong coating with excellent water repelling properties. This product protects the walls & roof tops from direct water penetration & dampness.

MAXIMA PLUS

USES Maxima Plus is single component, ready to use, two-in-one acrylic polymer based water proofing primer cum decorative coating system specially made for external & internal surfaces of Bungalows/villas & high raise apartments where a “Rich Look” is paramount requirement, which cannot be compared with any ordinary paint due to its DFT as well as decorative finish and water repelling properties. Though economically feasible the advent of MAXIMA PLUS is a value for money as it has no comparison & substitute. 1Kg Dr Leakage Maxima Plus is sufficient to cover an area of approximately 80sqft single coat. Two coats are recommended.

MIXING 1Ltr water addition is recommended while mixing.

RADIANCE

USES PRIMEX Interior / Exterior Wall Primer is a specially designed novel acrylic emulsion based wall primer suitable for Interior / Exterior wall applications with superior resistance to alkali and dampness. It gives excellent adhesion to the top coat emulsions applied over it and enhances the beauty of it. The surface to be painted should be dry and free from dirt. Grease, oil and loose matter. Mix 1 litre of primer with 100ml to 200ml of water and apply it on fresh / old walls. Newly Plastered walls must be allowed to cure completely before applying this primer. It can be used as a masking primer while repainting a wall with a different new colour to ensure maximum masking of the existing colour.

Stir well before use and keep container well closed after use.

HEAT PROOF MD

USES Ready to use, easy mixing, UV resistant coating

with cooling properties,. Excellent waterproofing characteristics, excellent adhesion, strong and flexible layer, long life. Specially designed for application on terrace for cooling purposes. It can also be applied on the entire building for heat resistance. Coverage: Primer (1st coat), 100 sqft per Ltr. 2nd & 3rd coat, 80 to 85 sqft per Ltr.

Dr. Leakage HEAT PROOF Medium Density is single

component, ready to use coating system which can be

mixed as follows:

1) 20Ltr Pack: Add water @2:1 and mix well to become primer (1st coat) 2) 20Ltr Pack: Add water @3:1 to become 2nd & 3rd coat.

Application Dr.Leakage HEAT PROOF Medium Density can be diluted with water @2:1 combination to become primer (1st coat) and application on a semi wet surface by roller. Primer needs 4 hours to fully set/dry. Apply 2nd coat @ 3:1 mixing combination and 3rd coat (if required) of same mixing combination, after 12 hours.

INVISI SHIELD

USES Dr. Leakage INVISI SHIELD is easy to apply, excellent water repellent, hydrophobic surface to bricks, concrete and asbestos sheets, can also be applied on wooden surfaces, colourless coating hence maintains natural colour, economical. To prevent water penetration on porous surfaces like concrete, tiles, bricks, asbestos sheets, all types of stones and even on wooden surfaces. Dr. Leakage INVISI SHIELD is supplied as ready to use water repellent. When applied on porous surfaces, it penetrates deeply and effectively on the surface and provides a barrier to water and protects the surface. The product appearance is white in colour and forms a clear water repelling and abrasion resistant layer when dry.

COVERAGE 100 sft per Ltr depending upon the porosity and surface texture. Normally it is a single coat application. Apply by Sprayer, Roller, Brush.

VELOX 2K

USES liquid) waterproof coating for concrete surfaces. The medium viscosity coating system makes a tough, durable, abrasion resistant, flexible UV resistant, layer on the surfaces and has an excellent adhesion to the concrete. It is recommended for water proof coating application for basements, sunken slabs balconies, water tanks, roof slabs, and swimming pools, lift pits etc. Two coats are recommended. Available in a set comprises of 9 kg powder and 5 Kg liquid. Coverage: 300-350sft (Single coat) per set.

MIXING 1Ltr water addition is recommended while mixing.

VELOX 2K MICRO

USES Dr. Leakage VELOX 2K MICRO is two part (powder and liquid) acrylic polymer modified and fibre reinforced

waterproof cum insulating cum anti carbonation coating.

This product makes a tough, durable, abrasion resistant,

flexible, UV resistant waterproof coating cum insulating

and anti-carbonation layer in white colour on the surface.

While the coating delivers excellent waterproofing

characteristics, it also provides cooling effect to the tune of

5°C to 8°C and anti-carbonation protection to the building.

Dr Leakage VELOX 2K MICRO is a customer friendly product

which is feasible for wide area application like concrete

surfaces, roof top, retaining walls, water tank, exposed

areas of entire buildings, asbestos sheets and many.

Available in a set comprises of 9kg powder and 5ltr liquid.

Coverage: 250 and above sqft (Single coat) per set.

MIXING 1Ltr water addition is recommended while mixing.

COLOUR White

VELOX 2k MD

USES Dr. Leakage VELOX 2K Medium Density is two part

modified cementitious waterproof coating. It makes a tough, resistant waterproof layer on the surfaces and has an excellent adhesion to the concrete. It is recommended for waterproofing application coating for basements, sunken slabs, balconies, water tanks, roof slabs, swimming pools, and lift pits etc. Two coats are recommended. Available in a set comprises of 9kg powder and 5ltr liquid. Coverage: 300sqft(Single coat) per set.

MIXING Water addition is not recommended.

ADMIX MICRO

USES ADMIX MICRO is single component, ready to use, general purpose cementitious repair micro concrete. It can be pumped or poured into restricted areas. Attains rapid strength and impart expansion properties(0.8%) in the plastic stage while minimizing water requirement. ADMIX MICRO attains compressive strength of 600kgs/cm2 in 28 days. It is chloride free and ideal for RCC structure repairs and industrial floors.

COLOUR COAT PRO

USES COLOUR COAT PRO is a single component, pigmented, ready to use, acrylic polymer based water proof cum aesthetic coating system for tiles and concrete. It has excellent adhesion and flexible layer formulating characteristics and delivers excellent hiding/filling properties and glassy finish, It is water thinnable and customer friendly product. 1 Lt Dr Leakage COLOUR COAT PRO is sufficient to cover an area of 100 to 120 sft. Available in RED and BLACK colours.

ANTICORE

USES ANTICORE is a single component, protective, anti corrosion coating for steel and reinforcement particularly suitable for embedded steel in concrete. This water dilute-able versatile product has excellent bonding with re-bars and concrete. It provides a tough and abrasion resistant film on the steel / reinforcement surfaces, which protects the steel from moisture and corrosion. Product colour is Red/Grey.

CRACK SEALER

USES CRACK SEALER is single component, non-metallic, chloride free cementitious, water proofing characteristics crack filling compound in grey colour. Attains strength of 400kg/cm2 in 28 days. Dr Leakage CRACK SEALER ensures perfect bonding on both sides of the cracks and provides excellent crack filling properties and water tightness. Add bonding agent Dr Leakage PRIMIS or SB LATEX MD along with water

MIXING 1:1 ratio for perfect bonding and it is an added advantage.

ADMIX BLOCK HD

USES ADMIX BLOCK HD is fast setting & accelerating plasticizer for PCC works. Inclusion of this chemical into the mix will increase strength, accelerate setting time and improve finishing. Product is exclusively designed for concrete blocks, hollow blocks, pavement blocks and designer tiles. It can also be used for electric pole manufacturing and particularly for all PCC works. reduces vertical/ corner breakages while handling and during transportation. it accelerates setting time which improves productivity. The excellent smooth finish speaks quality by itself

DOSAGE 200ml to 250ml per 50kg cement. However optimum dosage to be determined

ADMIX BLOCK HD PLUS

USES ADMIX BLOCK HD PLUS is an improved version of admix block hd specially designed for heavy duty works like road curbs, compound walls, hume pipes, man-hole covers etc. ADMIX BLOCK HD PLUS accelerates setting time while protecting the corners which improves productivity and quality. the excellent smooth finish speaks quality by itself

DOSAGE 200 ml per 50kg cement mix. optimum dosage to be determined at site.

TOP GUAARD-9

USES Dr. Leakage TOPGUAARD-9 is an elastomeric and long lasting transparent overcoat for all waterproof applications which protects the waterproofed surface from any kind of colour fading and colour variation due to dust accumulation damages. Excellent monolithic bonding, abrasion resistant, 100% water repelling protection, long life for water proofed surface, anti fungus & customer friendly.

COVERAGE 150 sqft

MICROSEAL PRO

USES Dr. Leakage MICROSEAL PRO is single component, ready to use product, in powder form. This product can be used for a variety of applications like tile joint filling, crack filling and for water proof primer on fungus filled or oily surfaces. The application combination of Dr. Leakage MICROSEAL PRO is: Dr. Leakage MICROSEAL PRO + Dr. Leakage All Bond SBR). The paste form can be used for tile joint filling & crack filling whereas liquid form for water proof primer on specific surfaces.

ADMIX GROUT IG

USES Dr. Leakage ADMIX GROUT IG is single component, positive expansion characteristics admixture in powder form for injection grouting application. Attains rapid strength and does not bleed after grouting.

DOSAGE 

200gm per 50kg cement. Increases workability and plasticity and hence ensures perfect filling of voids.

TILE ADHESIVE

USES Dr. Leakage TILE ADHESIVE is single component, cement based, waterproofing characteristics, cermaic tile adhesive. The homogeneous non-shrink mortar gives uniform bonding for tiles and provides waterproofing characteristics. It is deisgned for three in-one application (floor tile, wall tile and tile-on-tile). Available in 25kg bags which gives coverage of 5m2 in 4mm thickness.

Recron Mat 80 GSM

USES Recron Mat 80 GSM is a non-woven fabric reinforcement material used in waterproofing applications to provide additional strength to critical areas. It is mainly used in areas such as corners, haunching areas, and other high stress points where movement and stress concentration may lead to cracks or waterproofing failures. By placing Recron Mat in these areas, it helps to reinforce the surface, control crack development, and improve the overall performance of the waterproofing system.

The mat can be applied by dipping it in Primis or Allbond SBR waterproofing chemical and laying it over the required area to ensure proper bonding and reinforcement.

ROOFCARE PLUS

USES ROOFCARE PLUS is a single component which comes as semi liquid in nature, white colour coating for exposed walls & roof tops. It fills micro porosity, hairline cracks & provides a flexible and strong coating with excellent water repelling properties. This product protects the walls & rooftops from direct water penetration & dampness.

WALLMAXX

USES Wallmaxx is single component, ready to use, two-in-one acrylic polymer based water proofing primer cum decorative coating system specially made for external & internal surfaces of Bungalows/villas & high rise apartments where a “Rich Look” is paramount requirement, which cannot be compared with any ordinary paint due to its DFT as well as decorative finish and water repelling properties. Though economically feasible the advent of Wallmaxx is a value for money as it has no comparison & substitute. 1Kg Dr Leakage.

Wallmaxx is sufficient to cover an area of approximately 80sqft single coat. Two coats are recommended.

MIXING 1Ltr water addition is recommended while mixing.

PRIMEGUARD

USES All structures that are required to be waterproofed & protected against the ingress of moisture, like basement, water tank, swimming pools, sunken slabs, retaining walls, terrace slabs, lift pits etc

MIXING 1:1:3 (Primeguard:water:cement) to form a paint consistency.

APPLICATION Remove all loose particles from the surface, clean the area & keep the surface slightly wet. The prepared primis to be applied by brush & provide sufficient hiding properties to form a uniform waterproof layer, water curing 2 to 3 times after 8 hours of application, is an added advantage.

Fiber Mesh 45 GSM

USES high-strength reinforcement mesh used in waterproofing systems to long-term protection. It acts as a strengthening layer between waterproofing coatings, helping to prevent cracks, surface damage, and coating failures caused by surface shrinkage, material stress, and temperature variations.

During the construction stage, Fiber Mesh is also used at column and brick wall junctions during plastering work to provide additional reinforcement and improve crack resistance at joint areas.

One roll of Fiber Mesh 45 GSM covers approximately 500 sq.ft